Mipa 2K Multifiller quick-drying primer/sanding primer that can also be used wet on wet. Fits steel, iron, aluminium, galvanized, also most plastics in the automotive industry.
As a base for plastic. Most plastics used in the automotive industry such as PP-EPDM, ABS, PC, ABS-PC, PMMA, PUR, PVC and GRP).
Can be used as a sanding primer , or wet in wet filling primer.
Mixing ratio:
MIPA Multifiller is mixed with MIPA 2K-HÄRTER HS10 kurz (fast) or H5 extra kurz (extra fast) – hardener Mix 4:1.
HS10 hardener 6:1 mixing ratio.
Thinner:
- Grinding primer 25-35 s DIN 4 mm -thinning 0-5% hardener H5 and H10 4:1 or thinning 5-10% and Hardener HS10 6:1
- Wet on wet 15-20 s DIN 4 mm thinning 10-15% hardener H5 or H10 4:1 or thinning 25-30% and Hardener HS10 6:1
- Plastic 15-20 s DIN 4 mm -thinning 10-15% hardener H5 or H10 4:1 or thinning 25-30% and Hardener HS10 6:1
Pressure: 1.6 - 2 bar
Nozzle: 1.2 – 1.8 mm
Layers: 1-3
Between layers: 5 - 8 min (10 -15 min before oven)
Usage time: approx. 1 h at room temperature (20 °C)
Layer thickness: Depending on the area of use approx. 20 – 180 μm.
- Sanding primer, 60 - 180 μm
- Wet in wet filler, 40 - 60 μm
- plastic 20 - 30 μm
Drying time: At 20c sanding dry approx. 4 - 5 h, Wet in wet can be overpainted after approx. 15 - 20 min.
Oven temperature +60c
Sand dry approx. 30 - 40 min
Dark gray (approximately RAL-7011)
The product contains:
Mipa 2K hardener, H5 extra kurtz -1L
Mipa Hardener HS10 1L
Acrylic thinner V25 1L
