Mipa P16 light filler perfect for the final adjustments of the basic job. An easily sanded putty for steel, iron, sheet metal, fiberglass, carbon fiber, as well as galvanized and aluminum surfaces. Also works well for wood. About Make sure to smooth down old paint with coarser sandpaper before applying putty.
Tips for the best end result, rough up the surface to be puttyed with one of the following P80 - P180 sandpapers , wipe off with silicone detergent . Apply several thin layers of putty rather than one thick layer. Sand hardened putty with P240 - P320, preferably by hand and with a sanding block, as you have more control over the smoothness.
If you are going to putty on a galvanized or aluminum surface, you can first prime with Mipa EPX epoxy for better adhesion when you then apply the putty.
- Drying time at 20 °C 20 - 25 min and at 60 °C 5 - 10 min
- Working time after application of hardener 4 - 5 min at 20 °C
- Minimum working temperature 10 °C
- Hardener included
The product contains: